Electromagnetic Magnetic Separator Machine Automatic Water Cooling
for Slurry 5T
1. High field strength and large gradient,
2. Strong magnetic force,
3. An obvious efficiency in iron remove.
4. Applying water to cool the machine
Automatic Water-cooling Eletromagnetic Slurry Separator is a new
model of separator with high efficiency. The machine cools itself
by deionized water circulating in the hollow copper pipe through
Owing to the special structure,Water-cooling Eletromagnetic Slurry
Separator have the following advantages: high intensity magnetic
field; the temperature inside of the machine rises slowly, the
magnetic field intensity are not easy to decrease when the machine
run for a long time; long working period, have a wide range of
adaption in the particle of feeding ore and the thickness of
slurry; high efficiency in mineral processing; easy to manual and
Firstly, power on, then open the admission valve and slurry valve,
close the return slurry valve and iron discharging valve, then
magnetizing. After a few minutes later(you can set the time
whatever you like depending on yourself condition),close the
admission valve and slurry valve, open the back slurry valve to
discharge the remaining slurry in the separator, then magnetic
cutting, close the admission valve, slurry valve and back slurry
valve, open the iron discharging valve to discharge the magnetic
material which are absorbed on the magnetic media.
Automatic Water-cooling Eletromagnetic Slurry Separator Series: It
is used for purifying the non-metallic mineral such as quartz,
feldspar and kaolin.
Ferrous metals mineral: hematite, martite, limonite, siderite,
Non-ferrous metals mineral: used for separating wolframite from
Rare earth ore: recycle tantalum-niobium ores and monazite.
other industries: iron ore, effluent of power station disposal,
disposal of contaminated chemical raw material.
1. Work magnetic source using high magnetic energy product and
dielectric materials with high gradient, high field intensity, big
gradient, strong magnetic force.
Uniform distribution, the density of soft magnetic medium has
greatly increased the capture probability of ferromagnetic
impurities in pulp.
Due to the resistance of dielectric materials can make the iron
slurry is longer than the time slowly through the magnetic field in
a row, effectively remove of strong magnetic impurities and part of
the weak magnetic iron oxide and titanium oxide, improve product
whiteness, in order to achieve the ideal effect of iron removal.
2. PLC control, continuous work, automatically remove iron,
automatic cleaning, cleaning time and cycle are adjustable, high
reliability, long service life.
3. High intensity magnetic iron absorption, demagnetization wash,
iron clean, less water, can remove working medium inspection,
cleaning, effectively avoid cross effects of different size.
4. The host is not electricity, low use cost, achieving energy
saving and environmental protection, high efficiency on iron